STRING WOUND DEPTH FILTER CARTRIDGE
Product Details
The PP series cartridges offer wide chemical resistancy spectrum. These cartridges are manufactured by PP cord wound on a PP core in a precise pattern, assuring a high efficiency rating as well as a high dirt holding capacity
Flow per 10”
Std 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.
Technical Specification:
| MOC | Core | Diameter inch/mm | Length | Micron |
| PP/ Cotton | PP/SS | 2.5” (63) | 10” | 0.5 |
| 4”(100) | 20” | 1 | ||
| 4.5”(115) | 30” | 5 | ||
| 40” | 10 | |||
| 25 |
SPUN PP DEPTH FILTER CARTRIDGE
Product Details
The SP Series cartridges are made up of 100% pure PP fibers. The fibers have been carefully spun together to form a true graded density cartridge.
Flow per 10″:
Std: 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.
Flow per 10”
Std 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.
HIGH EFFICIENCY PLEATED PP FILTER CARTRIDGE
Product Details
Micron: 0.2, 0.45, 1, 5, 10, 25
The PL PP series of cartridges are the most latest form of truly graded density micro-fiber media in pleated form. The multi layer pleating has created the graded density with coarser on the outside and finer towards the inside thereby increasing the dirt holding with very high efficiency.
Technical Specification:
| Media | Length | Type | |||
| PP | Polyproplene | 5 | 125mm | DOE | Double open end |
| 9 | 245mm | ||||
| PES | Poly Ether Sulfon | 10 | 251mm | 222 S | SOE Code 3 Spear |
| PT | PTFE | 20 | 508mm | 222 F | SOE Code 3 Flat |
| 30 | 762mm | 226 S | SOE Code 7 Spear | ||
| NY | Nylon | 40 | 1016mm | 226 F | SOE Code 7 Flat |
ACTIVATED CARBON FILTER CARTRIDGE
Product Details
The CT series cartridges combine the long life of carbon block filtration with higher dirt holding capacity. These cartridges yields 5 micron nominal filtration which prevents the cartridge from plugging before its absorption capacity is exhausted, maximizing the utilization of the carbon.
Flow per 10”:
16 LPM for std 10” and 30LPM for Jumbo 10”.
Technical Specification:
| MOC | Diameter inch/mm | Length | Micron |
| ACTIVATED CARBON BLOCK | 2.5” (63) | 10” | 5 |
| 4.5”(115) | 20” |
PLASTIC FILTER HOUSINGS
Product Details
The plastic filter housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 5”, 10” and 20” configuration with both slim for low flow and Jumbo for large flow application. The Optional Relief Valve on the inlet of the cap gives ease of air release and prevents vacuum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The top seated
silicon O rings in the slim and the body fitted double O rings in the Jumbo makes it Leak Proof even at high pressure applications.
Flow Per 10” :
Polypropylene / Poly carbonate / SAN
Technical Specification:
| Model | Size | Conn | MOC |
| Standard Blue (2.5”) | 10” | ½”, 3/4”, 1” | Polypropylene |
| 20” | |||
| BB-L Jumbo (4.5”) | 10” | 1”, 1.5” | |
| 20” | |||
| Clear(2.5”) | 10” | ¾” | SAN |
| 20” |
BAG FILTER ASSEMBLY
Product Details
Conn: 1.5” BSP F
The series bag vessels are made of light weight corrosion resistant PP to give all strength required without being bulky. The fixed head mounting & compact design makes it easy to mount to any machine. All the PBA models are supplied with Pressure guage, wrench & drain valve.
Configuration:
Std : Dia 4.5” x 10” & 20” with 1.5” BSP female threded connection
Flow per 10”:
100 LPM for raw water with operating pressure of 2.5 bar.
